S355 Flat steel - Jinan Tianzan Steel Co.,Ltd





S355 Flat steel

Product Introduction

S355 Flat steel

S355 is a low-carbon structural steel with good weldability which in effect means that welding without pre-heating is usually feasible unless the parts involved are very large. The highest permitted level of carbon equivalent is in the range 0.45 - 0.52% depending on diameter.

S355 is standardised in SS-EN 10025 - 2. The (discontinued) SS-designation is 2172. The number 355 relates to the minimum level of yield strength in MPa for the smallest dimensions while J2 prescribes that Charpy-V impact toughness shall be at least 27 Joule at -20°C. The bar that is stocked has either the addition + AR which shows that the delivery version is hot rolled or + N which indicates normalized condition. Diameter tolerances are according to SS-EN 10060. The straightness (arrow height) for a normal direction bar must be better than 0.004 times the length of the bar.

The minimum prescribed level of yield strength for steel S355 varies depending on diameter over the range 355 - 275 MPa. The interval for tensile strength and the minimum allowed elongation in a tensile test decrease somewhat as the diameter increases.

If the application requires that the part has a wear-resistant surface, S355 responds well to both case hardening and nitriding. Furthermore, its strength can be increased via quenching and tempering provided cooling during hardening is fast enough (in water or polymer quenchant).

Standard	ASTM A479,ASTM A276,ASTM A484, ASTM A582,
	ASME SA276, ASME SA484, GB/T1220, GB4226, etc.
Material	301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202
	321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, etc.
Specifications		Thickness	0.3~200mm
	Flat bar	Width	1~2500mm
	Angle bar	Size: 0.5mm4mm4mm~20mm400mm400mm
	Round bar	Diameter:0.1~500mm
	Square bar	ize: 1mm1mm~800mm800mm
Length	2m, 5.8m, 6m, or as required.
Surface	Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term	Ex-work, FOB, CFR, CIF, etc.
Export to	Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
	Viet Nam, India, Ukraine, Brazil, South Africa, etc.
Delivery Time	Standard size is in stock,prompt delivery or as order's quantity.
Package	Export standard package, bundled or be required.
	The inner size of container is below:
	20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
	40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
	40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

Standard export packing (inside:water proof paper,outside:steel covered with strips and pallets)

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)

{{title}}