S235J2 Carbon steel square tube





Product Introduction

Rectangular tube S235J2 also call Rectangular hollow section S235J2,rectangular pipe S235J2. S235J2 rectangular tube have to be done -20 Deg.

Centigrade low temperature impacting test.

Our stock for S235JR rectangular tube including:

30×50mm,30×60mm,40×50mm,40×80mm,40×100mm,50×100mm,60×80mm,60×100mm,

80×100mm,80×120mm,100×150mm,100×200mm,100×250mm,100×300mm,150×200mm,

200×400mm,300×400mm,wall thickness for these rectangular tubes range from 1.0-20mm.

Other relative rectangular tube steel grades in EN 10210 contains S275JR rectangular tube,S355JR rectangular tube,S355J0 rectangular pipe,S355J2H rectangular hollow section.

EN 10210 S235J2 Rectangular tube and S235JR rectangular tube in chemical composition and mechanical property:

S235J2 vs S235JR		Chemical composition: Heat Analysis Max%
Standard	Grade	C	Mn	P	S	Si	Cu	N
EN 10210	S235JR	0.16	1.2	0.025	0.02	-	0.55	0.012
EN 10210	S235J2	0.17	1.4	0.025	0.025	-	0.55	-
Mechanical Properties:		Thickness		Yield strength				Tensile strength
Mechanical Properties:		Thickness		Mpa Min.				Mpa
EN 10210	S235JR	T≤16		235				360-510
EN 10210	S235J2	T≤16		235				360-510

PACKAGE DELIVERY 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM

40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM

In bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands

{{title}}